中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 14949.6-2021 錳礦石 銅、鉛和鋅含量的測定 火焰原子吸收光譜法(中英文版) Manganese ores—Determination of copper,lead and zinc content—Flame atomic absorption spectrometric method |
|||
QB 356-1973 封套紙板(中英文版) (Chinese Industry Standard) |
|||
SJ 3146-1988 kfc-g01型彩色電視廣播接收機用杠杆式調整開關詳細規範(中英文版) Detail specification for lever setting switches (Type KFC-G01) for use in colour television broadcasting receivers |
|||
GB/T 29896-2013 接觸土壤防腐木材的防腐劑流失率測定方法(中英文版) Method of determining the leachability of wood preservatives from treated wood in soil contact |
|||
QC/T 222-1997 自卸汽車通用技術條件(中英文版) (Dump Truck General technical conditions) |
|||
GB 1886.41-2015 食品安全國家標準 食品添加劑 黃原膠(中英文版) National Food Safety Standard-Food Additives-Xanthan gum |
|||
GB/T 20303.1-2016 起重機 司機室和控制站 第1部分:總則(中英文版) Cranes—Cabins and control stations—Part 1: General |
|||
JT/T 660-2006 水上加油站安全與防污染技術要求(中英文版) Technical requirements for safety and pollution prevention of waterborne bunker fuel oil station |
|||
FZ/T 90050-1993 紡部機械左右側定義(中英文版) (Spinning the machinery left side definition) |
|||
GB/T 14814-1993 資訊處理 文本和辦公系統 標準通用置標語言(SGML)(中英文版) Information processing--Text and office systems--Standard generalized markup language(SGML) |
|||
GB/T 22512.1-2012 石油天然氣工業 旋轉鑽井設備 第1部分:旋轉鑽柱構件(中英文版) Petroleum and natural gas industries - Rotary drilling equipment - Part 1:Rotary drill stem elements |
|||
JJG 264-1981 容重器試行檢定規程(中英文版) Verification Reguiation of Test Weight Apparatus |
|||
SJ/T 10519.13-1994 塑膠注射模零件 矩形頂杆(中英文版) Components of injection mould for plastics. Flat ejector pins |
|||
NB/T 31095-2016 風電電氣設備安全通用要求(中英文版) Electrical device for wind power. Safety general requirements |
|||
GB/T 17436-1998 船舶危險區域防爆電氣設備的選用(中英文版) Selection of explosion proof electricalequipment in ship hazardous areas |
|||
TB 1959-1987 0(中英文版) (Chinese Industry Standard) |
|||
GB/T 5286-2001 螺栓、螺釘和螺母用平墊圈 總方案(中英文版) Plain washers for bolts,screws and nuts--General plan |
|||
JJG 965-2013 通信用光功率計檢定規程(中英文版) Verification Regulation of Optical Power Meter in Telecommunication |
|||
HJ 2503-2011 環境標誌產品技術要求 印刷 第一部分:平版印刷(中英文版) Technical requirements on environmentally labeled products. Printing. Part 1: Planography printing |
|||
SJ 50599/6-2006 系列ⅲ j599/25螺紋連接錫焊式接觸件錫焊安裝氣密封固定電連接器(n和y類)詳細規範(中英文版) Detail specification for sheet connectfors e1ectrical, circular, threaded, receptacle, solder mounting, hermetic, hermetic solder contacts series Ⅲ, J599/25(classes N and Y) |
|||
GB/T 27652-2011 防腐木材化學分析前的預處理方法(中英文版) Methods of pretreatment for chemical analysis of preservative-treated wood |
|||
HG/T 3560-1988 印刷照像排字軟片(中英文版) Graphic photosetting film |
|||
TB/T 2710.2-2005 機車、動車用空氣壓縮機技術條件 第2部分:螺杆空氣壓縮機(中英文版) Technical specification for air compressor on locomotive and power car Part 2: Screw air compressor |
|||
GB 16196-1996 車間空氣中凝聚二氧化矽粉塵衛生標準(中英文版) Health standard for condensed silica dust in the air of workplace |
|||
HG/T 2173-1991 銀--膠型縮微攝影負片(中英文版) (Silver - plastic type microfilming negative) |
|||
GB/T 39179-2020 工業園區迴圈產業鏈診斷導則(中英文版) Guideline for diagnosis of circular industrial chains in industrial parks |
|||
YY/T 0734.4-2016 清洗消毒器 第4部分:對非介入式等醫療器械進行濕熱消毒的清洗消毒器要求和試驗(中英文版) (Cleaning and disinfection - Part 4: Non-intrusive and other medical equipment for heat disinfection cleaning and disinfection - Requirements and test) |
|||
CJ/T 57-1999 城市污水 油的測定 重量法(中英文版) Municipal sewage. Determination of oil. Gravimetric method |
|||
YD/T 5033-2005 會議電視系統工程驗收規範(附條文說明)(中英文版) Acceptance Specifications of Videoconference System Engineer |
|||
GB/T 32498-2016 金屬基複合材料 拉伸試驗 室溫試驗方法(中英文版) Metal matrix composites—Tensile testing—Method of test at ambient temperature |
|||
GB/T 20979-2019 資訊安全技術 虹膜識別系統技術要求 (中英文版) Information security technology—Technical requirements for iris recognition system |
|||
JG/T 5041.2-1993 長螺旋鑽孔機性能試驗方法(中英文版) Testing methods for the performance of full earth auger |
|||
GB/T 21508-2008 燃煤煙氣脫硫設備性能測試方法(中英文版) Performance test method for coal-fired flue gas desulphurization equipment |
|||
GB/T 34418-2017 語言培訓服務基本術語(中英文版) Fundamental terminology in language training service |
|||
GB/T 36241-2018 氣體旋進旋渦流量計(中英文版) Vortex precession flowmeters for gas |
|||
SN/T 2484-2010 精油中砷、鋇、鉍、鎘、鉻、汞、鉛、銻含量的測定方法 電感耦合等離子體質譜法(中英文版) Determination of As,Ba,Bi,Cd,Cr,Hg,Pb,Sb content in essential oil. Inductively coupled plasma-mass spectrometry |
|||
GB/T 24921.1-2010 石化工業用壓力釋放閥的尺寸確定、選型和安裝 第1部分:尺寸的確定和選型(中英文版) Sizing,selection and installation of pressure reliev valves for petrochemical industries - Part 1: Sizing and selection |
|||
SB/T 10727-2012 環保型建材及裝飾材料技術要求(中英文版) Technical requirements for environmentally friendly building and decorating materials |
|||
YD/T 2429-2012 電信網和互聯網服務生命週期管理技術要求(中英文版) The technical specification of lifecycle management for telecmmunication and Internet services |
|||
GB/T 35381.11-2017 農林拖拉機和機械 串列控制和通信資料網路 第11部分:資料元字典(中英文版) Tractors and machinery for agricultural and forestry—Serial control and communications data network—Part 11:Mobile data element dictionary |
|||
GB/T 18380.33-2008 電纜和光纜在火焰條件下的燃燒試驗 第33部分:垂直安裝的成束電線電纜火焰垂直蔓延試驗 A類(中英文版) Tests on electric and optical fibre cables under fire conditions - Part 33:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A |
|||
DL/T 871-2004 電力系統繼電保護產品動模試驗(中英文版) The dynamic test of the power system protective products |
|||
GB/T 861.1-1987 內齒鎖緊墊圈(中英文版) Lock washers internal teeth |
|||
QB/T 4082-2010 脂肪醯胺丙基二甲基甜菜堿(中英文版) Fatty alkylamidopropyldimethyl betaine |
|||
SY/T 6101-2012 凝析氣藏相態特徵確定技術要求(中英文版) Technical requirements for determining phase behaviors of gas condensate reservoirs |
|||
SN/T 0837.3-2011 進出口三氧化二砷化學分析方法 第3部分:鐵含量的測定(中英文版) Method for chemical analysis of arsenic trioside for import and export. Part 3: Determination of iron content |
|||
GB/T 6113.101-2021 無線電騷擾和抗擾度測量設備和測量方法規範 第1-1部分:無線電騷擾和抗擾度測量設備 測量設備(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-1: Radio disturbance and immunity measuring apparatus—Measuring apparatus |
|||
QB/T 1716-1993 自行車鏈條(中英文版) (Bike. Chain) |
|||
SJ 2646.3-1985 冷沖模 頂杆(中英文版) Cold press dies--Kicker pin |
|||
GB/T 30265-2013 資訊技術 學習、教育和培訓 學習設計資訊模型(中英文版) Information technology—Learning, education and training—Learning design information model |
找到:115477條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [880] [881] [882] [883] [884] [885] [886] |